PEX Fittings - components of the pipeline, which serve to connect its various parts to others. Distinguishes them from similar elements - flanges, elbows, transitions - that PEX fittings connect different components through a pipeline between the thread cut into them and the parts pipeline. Carving is usually cut by both the inner part of the fittings and pipes, and on the outside. All components of the compounds except fittings provide a connection between a pipe by welding, bolts, and other.
PEX Fittings are usually being used at the terminal branches pipeline, in other words, after entering the line in the house and posting on this house. They have little control, the most frequently used - DN15, DN20, DN25, DU32, DU40.
By fittings include: bochata and couplings (for connecting the various parts of pipeline between themselves); corners (to change the direction of the line), tees and crosses (for the branch pipeline); sleeves (for the connection is already fnktsioniruyuschih tubes) tubes (for plugs) and etc.
One type of fittings - clutch. It is designed to interconnect two pipes. The most primitive piece - a segment of pipe, the inner surface of which is threaded to connect the pipes with a sleeve on the outer surface of the pipes that need to join, cut thread, which after the screwed coupling, apply any sealer (flax, hemp, Energoflex PE tape). On the opposite side of clutch in it screwed the other tube (be sure to seal) with the same external thread, as in the previous tube. This coupling is simple.
The seal is used almost always for threaded connections, and further on it will not focus, and if there is mention of the compound on the thread, it will be kept in mind that this applies sealant.
There are also transitional couplings, which are used to move from one control to another. Thus, on the one hand clutch has a diameter of the pipe included in it, on the other side - overlooking the pipe diameter, which in size, respectively, differs from the first.
PEX Fittings are usually being used at the terminal branches pipeline, in other words, after entering the line in the house and posting on this house. They have little control, the most frequently used - DN15, DN20, DN25, DU32, DU40.
By fittings include: bochata and couplings (for connecting the various parts of pipeline between themselves); corners (to change the direction of the line), tees and crosses (for the branch pipeline); sleeves (for the connection is already fnktsioniruyuschih tubes) tubes (for plugs) and etc.
One type of fittings - clutch. It is designed to interconnect two pipes. The most primitive piece - a segment of pipe, the inner surface of which is threaded to connect the pipes with a sleeve on the outer surface of the pipes that need to join, cut thread, which after the screwed coupling, apply any sealer (flax, hemp, Energoflex PE tape). On the opposite side of clutch in it screwed the other tube (be sure to seal) with the same external thread, as in the previous tube. This coupling is simple.
The seal is used almost always for threaded connections, and further on it will not focus, and if there is mention of the compound on the thread, it will be kept in mind that this applies sealant.
There are also transitional couplings, which are used to move from one control to another. Thus, on the one hand clutch has a diameter of the pipe included in it, on the other side - overlooking the pipe diameter, which in size, respectively, differs from the first.
Recent Comments